MS密封膠拉伸后出現返白的原因及解決辦法
2024-07-21
推薦新聞
硅烷改性聚氨酯密封膠在建筑工程中的應用
2024-07-21
聚氨酯密封膠在建筑領域發展較快
2024-07-21
丁基防水嵌縫膠在金屬圍護系統中的應用
2024-07-20
硅烷改性聚氨酯密封膠不適合在金屬圍護系統...
2024-07-20
阻流型MS密封膠的拉伸強度
- 發布時間 : 2024-1-13 15:59:36
- Views:
(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.
阻流型MS密封膠的拉伸強度
(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.
- 發布時間 : 2024-1-13 15:59:36
- Views:
Information
試驗結果如表2所示，表2扣的成型膠條與方法I中使用的成型膠條相同(膠條配方與II-2相同，見圖7)。試驗時發現MS密封膠或膠條有2種破壞形式，A型破壞(破壞位置在MS密封膠或膠條本身)與B型破壞(破壞位置在MS密封膠或膠條與混凝土粘接面處)。從表2可以看出，4組試件中有3組3個試件在同一壓力下破壞，1組相差1個等級，結果均有效，試驗結果穩定，重現性好，證實方法n合理有效。
農2可見，4種MS密封膠(膠條)中的成型膠條配，月相同，抗什卻比11一2高2級這主要是山上聚氨V4反應過積會一氣泡戎缺陷為了提高流動性，成膠條澆筑，佰溫卜反應較快，氣泡迅速產幾，此時進行J物理消泡(即筷將氣泡劃開)，故高溫下澆筑經過消泡的成5d膠條比常溫接澆筑的MS密封膠更密實，杭史尚:阻流烈聚氨脂II-4的抗壓值比E流平型聚氨醋l一2高1級，這!工能是山于阻流型MS密封膠的拉伸強度比自流型MS密封膠但是ll-3抗壓值卻比l一1低1級，這說明阻流吧聚膠條粘接性能差的破壞形式即是證明c3個試件均是13破壞)。另外，方法I的粘接膠條況方法的l-3相，相同條件方法I抗壓值比方法l高2級，這要足山一法1足3面粘接方法則是粘接。http://www.mjdd002.com/
Scan the QR code to read on your phone
下一篇: 丁基防水嵌縫密封膠不透水試驗的破壞特征
下一篇: 丁基防水嵌縫密封膠不透水試驗的破壞特征
+86-
13573398725
sdyuantai@163.com
搜索